Testo Integration
Wello Field Service App is fully integrated with Testo devices and can read Testo measurement data from the Testo device and have this data available inside a work order report.
For the moment, we have 2 integrations with Testo devices:
Latest Testo device: Testo 300 with built in Wifi
Older model Testo devices: Testo 330 where data is transmitted to the Combustion app on the tablet via Bluetooth. Wello can read the data from the Combustion app.
Once connected, Wello Service App reads the Testo data and automatically populates it into the configured work order form. This removes the need for manual data entry and ensures that measurement results are included in the final service report.
To Configure Testo in Wello, two steps are required:
Configure your Work Order form to accept Testo data.
Connect your Testo device to the Field Service App.
Step 1 – Configure Your Work Order Form to Accept Testo Data
To be able to use the Testo plugin, you need to add a specific "Testo measurement" field inside your work order form. It's possible to add this field multiple times, this allows you to do several Testo measurements and import their data.
To add the Testo measurement field to a work order form:
Go to Settings on the portal
Select Work Orders, then go to the Forms tab
Use the add button to create your form.
In Form Composer step, create a chapter and add a field with input type "Testo measurement", then proceed to create your form.
When added, this field will look like a text area, the data will be filled by the Testo plugin. You can add this field multiple times on a form to capture multiple Testo measurement fields in one report.
Step 2 – Setup the connection to your Testo device
The connection to your Testo device can be setup from the Wello Service App.
Open the Wello Service App on your tablet or mobile device.
Tap the Waffle icon (nine dots) in the top right corner.
Go to the Settings option (gear icon).
In the Preferences tab, scroll down to the Measurement Plugin
Check the option applicable for your Testo device.
Testo combustion app
Testo hotspot
Testo QR code
Testo Bluetooth
Note: If you are using the Combustion app, make sure this app is running on your device also and contain the Testo measurement data.
If you are using Testo 300 device, make sure you are connected to the wifi hotspot on Testo device
6. After selecting the correct option, click on the Test button. If the connection is successful, you’ll see Testo data already in a popup
Use Testo Data inside your Work Order
Once the "Testo measurement" field and device are correctly set up, you can begin using Testo data in your work order completion form.
To record measurements inside a WO form:
On the field service app, open the Work Order you are working on.
Navigate to the form tab.
Open the form that needs to be fill in
If there is a Testo measurement field added in the form, you will see 2 buttons below the text area.
Collect Testo data – Clicking on "Collect Testo data" imports the Testo data and store it inside the read only text area.
Clear – This removes the existing data, allowing you to reimport new data if needed.
Once imported, the Testo measurement will be saved inside the form of the work order you are working on and depending on the form parameters (PDF options) you have setup for the form on the portal, it can be inserted on the service report of that work order or generate in a separate PDF.